Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: surge protectionDescription: Gas Discharge Tube - GTCX28-XXXM-R10 Series Tyco Electronics GTCX28-XXXM-R10 series gas discharge tubes have outstanding surge protection characteristics, low capacitance, and two types of transition voltages. These gas discharge tubes are suitable for protecting sensitive equipment, such as in the protection of telecommunications communication networks with high data transmission rates, including ADSL, VDSL, main distribution frame (MDF) modules, and surge protection on power lines. Two voltage options for 2-pole and 8mm devices, 420V and 470V respectively. Shape factor: low capacitance and insertion loss for axial leads. Applications include telecommunications MDF modules, xDSL equipment, RF system protection, antennas, and base stations. Industrial and consumer electronics products - Surge protectors, alarm systems.65625+$31.253050+$29.9174200+$29.1695500+$28.98251000+$28.79552500+$28.58185000+$28.44837500+$28.3147 -
![]()
Category: surge protectionDescription: DEHNshield The pre wiring of the surge arrester module optimized for applications combines lightning current and surge arrester, and is used for TN-S systems based on spark gap. It is a space saving lightning arrester that combines lightning current and surge arrester, and is used for compact and simple electrical devices that have already been installed. It has reduced technical requirements to protect terminal equipment and provides a readily installable housing with a transparent cover, with a protection level of IP65. Surge protection equipment, SPD (DIN rail) voltage surge, is often referred to as peak or transient overvoltage, which is usually caused by turning off fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.46211+$3732.113010+$3698.184725+$3681.220650+$3664.2564100+$3647.2923150+$3630.3281250+$3613.3640500+$3596.3998 -
![]()
Category: surge protectionDescription: DEHNshield The pre wiring of the surge arrester module optimized for applications combines lightning current and surge arrester, and is used for TN-S systems based on spark gap. It is a space saving lightning arrester that combines lightning current and surge arrester, and is used for compact and simple electrical devices that have already been installed. It has reduced technical requirements to protect terminal equipment and provides a readily installable housing with a transparent cover, with a protection level of IP65. Surge protection equipment, SPD (DIN rail) voltage surge, is often referred to as peak or transient overvoltage, which is usually caused by turning off fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.40451+$3417.291910+$3386.225625+$3370.692550+$3355.1593100+$3339.6262150+$3324.0930250+$3308.5599500+$3293.0267 -
![]()
Category: surge protectionDescription: Coaxial protector Male/Female F connectors for Cable TV and88101+$190.113410+$185.153950+$181.3517100+$180.0291200+$179.0372500+$177.71471000+$176.88812000+$176.0615 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Arrestor 150VDC 10kA Thru-Hole81315+$3.376425+$3.126350+$2.9512100+$2.8762500+$2.82612500+$2.76365000+$2.738610000+$2.7011 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Arrestor 230VDC 15kA Thru-Hole34635+$3.376425+$3.126350+$2.9512100+$2.8762500+$2.82612500+$2.76365000+$2.738610000+$2.7011 -
![]()
Category: surge protectionDescription: Gas Discharge Tube GDT/Gas Plasma Surge Arrester G31-A200X327310+$1.259650+$1.1942100+$1.1476300+$1.1196500+$1.09161000+$1.06362500+$1.02165000+$1.0123 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Surge Arrestor 550VDC 25kA Thru-Hole74745+$3.917725+$3.627550+$3.4244100+$3.3373500+$3.27932500+$3.20675000+$3.177710000+$3.1342 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Arrestor 90VDC 15kA SMD87025+$3.456025+$3.200050+$3.0208100+$2.9440500+$2.89282500+$2.82885000+$2.803210000+$2.7648 -
![]()
Category: surge protectionDescription: Surge Arrestor 2-Electrode Arrestor 800V 10kA Thru-Hole Taped Strip20335+$2.539425+$2.351350+$2.2196100+$2.1632500+$2.12552500+$2.07855000+$2.059710000+$2.0315 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Surge Arrestor 230VDC 10kA SMD77425+$2.440825+$2.260050+$2.1334100+$2.0792500+$2.04302500+$1.99785000+$1.979810000+$1.9526 -
![]()
Category: surge protectionDescription: GDT 500V 1kA 2Pole99735+$4.577925+$4.238850+$4.0014100+$3.8997500+$3.83182500+$3.74715000+$3.713110000+$3.6623 -
![]()
Category: surge protectionDescription: Cooper Bussmann SPD Solutions - Wind The Cooper Bussman Wind SPD solution consists of a base and locking module that features a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant Y circuit prevents damage to the surge protective devices. The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication, the remote signalling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed. Modular DIN-Rail design with colour-coding and rejection feature makes it easy to identify, install and maintain Built-in overcurrent protection eliminates the need for any additional fuse installation and wiring easyID™ Visual indication and optional remote contact signaling make status monitoring simple Fast-acting Short-Circuit Interrupting (SCI) technology responds efficiently to overvoltage conditions ### Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.97401+$851.414710+$821.540550+$817.8062100+$814.0720150+$808.0971250+$802.8691500+$797.64111000+$791.6663 -
![]()
Category: surge protectionDescription: Cooper Bussmann SPD Solutions - Photovoltaic The Cooper Bussman Photovoltaic SPD solution consists of a base and locking module that features a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant Y circuit prevents damage to the surge protective devices. The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication, the remote signalling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed. Modular DIN-Rail design with colour-coding and rejection feature makes it easy to identify, install and maintain Built-in overcurrent protection eliminates the need for any additional fuse installation and wiring easyID™ Visual indication and optional remote contact signaling make status monitoring simple Fast-acting Short-Circuit Interrupting (SCI) technology responds efficiently to overvoltage conditions ### Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.39731+$319.243510+$310.915450+$304.5305100+$302.3097200+$300.6440500+$298.42321000+$297.03522000+$295.6472 -
![]()
Category: surge protectionDescription: Surge Arrestor 2-Electrode Arrestor 600V 5kA SMD T/R30655+$1.940025+$1.796350+$1.6957100+$1.6526500+$1.62382500+$1.58795000+$1.573510000+$1.5520 -
![]()
Category: surge protectionDescription: Surge Arrestor 3-Electrode Surge Arrestor 90VDC 15kA Thru-Hole28975+$3.366925+$3.117550+$2.9429100+$2.8681500+$2.81822500+$2.75595000+$2.730910000+$2.6935 -
![]()
Category: surge protectionDescription: Surge Arrestor Gas Surge Arrestor 230V 10kA Thru-Hole Tray86015+$3.219825+$2.981350+$2.8143100+$2.7428500+$2.69512500+$2.63545000+$2.611610000+$2.5758 -
![]()
Category: surge protectionDescription: Surge Arrestor 2-Electrode Arrestor 90V 10kA SMD23605+$1.761825+$1.631350+$1.5399100+$1.5008500+$1.47472500+$1.44205000+$1.429010000+$1.4094 -
![]()
Category: surge protectionDescription: Surge Arrestor 2-Electrode Surge Arrestor 850VDC 60kA SMD40671+$207.993610+$202.567750+$198.4078100+$196.9609200+$195.8757500+$194.42881000+$193.52452000+$192.6202 -
![]()
Category: surge protectionDescription: Surge Arrestor 2-Electrode Arrestor Thru-Hole38255+$1.929225+$1.786350+$1.6862100+$1.6434500+$1.61482500+$1.57905000+$1.564810000+$1.5433 -
![]()
Category: surge protectionDescription: Tripp Lite DB25-ALL Network In-Line Dataline Surge Protector 120V / 230V 25Pin DB2563131+$184.629110+$179.812650+$176.1201100+$174.8357200+$173.8724500+$172.58801000+$171.78532000+$170.9826 -
![]()
Category: surge protectionDescription: WJ Furse Enhanced surge protector for Ethernet systems, suitable for twisted pair Ethernet systems, with RJ45 connection. Suitable for shielded or unshielded twisted pair cables with very low allowable voltage between all lines, without system damage or startup signal attenuation, including detachable DIN rail clips, or flat installation | ESP Class 6 | ESP Class 6/PoE -------------------------------------------------------------------------------------------------------------------------------------------------15781+$2524.936710+$2501.982725+$2490.505750+$2479.0288100+$2467.5518150+$2456.0748250+$2444.5978500+$2433.1208 -
![]()
Category: surge protectionDescription: UPS Network Management Cards Remote monitoring and control of an individual UPS by connecting it directly to the network Network Management Cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP Embedded technology provides exceptional reliability with notification features that inform you of problems as they occur For protected servers, the included PowerChute® Network Shutdown software provides graceful, unattended shutdown in the event of an extended power outage, always keeping business information safe Available for all UPS"s with SmartSlot™ Interface ### Accompanying CD with software, User Manual (Temperature Sensor 689-9143 only) # # # APC online86201+$5154.113810+$5107.258225+$5083.830450+$5060.4026100+$5036.9749150+$5013.5471250+$4990.1193500+$4966.6915 -
![]()
Category: surge protectionDescription: RF The equipment provides protection against lightning strikes or extremely high voltage pulses. Compact protection cost low universal connector interface broadband operation # # # Note includes gas membrane box, except for stock number 111-642, gas membrane box must be ordered separately, stock number 494-919 # # # Lightning arrester95031+$2763.970010+$2738.843025+$2726.279550+$2713.7160100+$2701.1525150+$2688.5890250+$2676.0255500+$2663.4620 -
![]()
Category: surge protectionDescription: RS Pro 90 V 10kA Coaxial surge arrester34691+$683.578210+$659.593050+$656.5949100+$653.5967150+$648.7997250+$644.6023500+$640.40481000+$635.6078 -
![]()
Category: surge protectionDescription: RS Pro RC Series 500 V power protector, DIN rail installation, 62 x 19 x 40mm48691+$134.517810+$131.008650+$128.3183100+$127.3825200+$126.6807500+$125.74491000+$125.16002000+$124.5752 -
![]()
Category: surge protectionDescription: RS Pro BS1363 Series 230 V ac 13.5kA power protector, 90 x 60 x 40mm37521+$235.230210+$229.093850+$224.3892100+$222.7528200+$221.5255500+$219.88911000+$218.86642000+$217.8436 -
![]()
Category: surge protectionDescription: BOURNS 2045-25-BLF Gas Discharge Tube (GDT), 2-Electrode, 2045 series, 250 V, axial lead, 10 kA, 700 V282310+$1.238050+$1.1738100+$1.1279300+$1.1004500+$1.07291000+$1.04542500+$1.00415000+$0.9949
